specification control drawing 300 constitution drive menlo park, ca 94025, usa thermofit devices title: soldersleeve device with localized solder high temperature unless otherwise specified dimens ions are in millimeters. inches dimensions are between brackets. document no.: b-013-1x tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron raychem reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. dcr number: d000155 replaces: d980890 drawn by: m. foronda date: 19-april-00 prod. rev.: see table doc. issue: 17 scale: none size: a sheet: 1 of 1 product revision product di mensions cable dimensions product name l max ?a min ?b min ?e max ?c max ?d min ?f min h 0.5 (h 0.02) g 0.5 (g 0.02) B-013-10 h 17.2 (0.675) 2.6 (0.085) 3.9 (0.155) 2.6 (0.100) 3.9 (0.155) 1.4 (0.055) 1.2 (0.045) 5.5 (0.215) 7.0 (0.275) b-013-11 e 17.2 (0.675) 4.8 (0.190) 5.9 (0.230) 4.8 (0.190) 5.9 (0.230) 2.5 (0.100) 1.7 (0.065) 5.5 (0.215) 7.0 (0.275) b-013-12 f 20.8 (0.820) 6.8 (0.270) 8.3 (0.325) 6.8 (0.270) 8.3 (0.325) 4.1 (0.160) 3.0 (0.120) 5.5 (0.215) 7.0 (0.275) b-013-13 f 24.5 (0.965) 10 (0.395) 11.6 (0.455) 10 (0.395) 11.6 (0.455) 6.5 (0.255) 4.5 (0.175) 8.0 (0.315) 9.5 (0.375) materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. solder preform with flux: solder: ty pe sn96 per ansi-j-std-006. flux: type rom1 per ansi-j-std-004. 3. meltable sealing rings: thermally st abilized thermoplastic. color: blue. application 1. these controlled soldering devices are de signed for termination of a nickel plated copper shield on cables having an insulat ion rated for at least +150 c. 2. temperature range: -55 c to +175 c with excursion to 200 c. 3. when installed per raychem process standard, rcps-100-70 or aerospatia le process standard, ipda 83-16, assemblies will meet those requirements of raychem specifications rt-1404. for best results, prepare the cable as shown:
|
